Accurate Measurement for Inside Mount Blinds: A Comprehensive Guide

Measuring for inside mount blinds requires careful precision to ensure a proper fit. This guide will walk you through the detailed steps, from clearing the area to recording your measurements, to help you achieve a polished look for your window treatments. Let's dive into the process with these essential tools and steps.

Tools Needed:

Measuring tape Pencil Paper Level (optional)

Steps to Measure:

1. Clear the Area:

Thoroughly remove any obstructions around the window such as curtains, blinds, or furniture. This ensures that you have an accurate measurement of the window opening.

2. Measure the Width:

Use the measuring tape to measure the width of the window opening at three points: the top middle, bottom middle, and sometimes the sides if the window is wide. Consider variations to ensure a snug fit. Record the narrowest measurement. This ensures that the blinds will fit inside the window frame without being too tight.

3. Measure the Height:

Measure the height of the window opening at three points: the left side, middle, and right side. Again, consider variations to ensure a snug fit. Record the longest measurement. This will ensure that the blinds cover the entire height of the window.

4. Check for Level (if needed):

Use a level to check if the window frame is even. Uneven frames may require adjustments in the measurements or in the way the blinds will hang.

5. Depth Measurement (if necessary):

Measure the depth of the window frame to ensure that the blinds will fit properly without protruding, especially for thicker blinds.

Additional Tips:

Round Down for Snug Fit:

When measuring width, always round down to the nearest 1/8 inch for a snug fit. This ensures that the blinds will sit tightly and not feel too loose or tight.

Record Clear Measurements:

Write down your measurements clearly to avoid confusion when ordering your blinds. Keeping a written record helps avoid errors in the production process.

Consult Manufacturer Guidelines:

It's important to check the manufacturer's instructions as different types of blinds may have specific measurement requirements. These guidelines provide valuable information on how to achieve the best fit for your blinds.

By following these steps, you can accurately measure your window for inside mount blinds, ensuring a proper fit and a polished look. The key is precision and attention to detail, which can significantly enhance the aesthetic and functional aspects of your home.

Conclusion:

Measuring for inside mount blinds is a crucial step in ensuring that your window treatments fit perfectly. By following the detailed steps outlined in this guide, you can achieve a professional and seamless installation. Take your time to measure accurately, and you'll be rewarded with beautifully fitted blinds that enhance the look of your window and your entire room.